What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 08:12

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
what exactly is a ‘surge’ protector?
This is where the MOV conducts again, and dissipated the energy.
What do you say after "Hi" when chatting?
This one hit behind the barn.
What does a fuse do?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes Rainy Season and Lightning.
Do you consider yourself pretty?
He then asserts :
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
nine
Here is a simplified AC power diagram.
How do you write a letter to your uncle who sent you money for your birthday outfit?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
but I think this circuit , shows a few more pieces.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What do you think is the #1 cause of why relationships nowadays don't seem to last long?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Who are your 5 or so favorite Quora people?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
I post the exact comment here.
There are two important concepts here.
What have you learned from your parents' mistakes?
the problem then depends on "how fast does the fuse operate?".
Now when you have a certain ac resistance, then a current flows in a loop.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The Best Clone Characters To Create In The Alters - GameSpot
There are three different concepts here that are getting confused.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A circuit breaker is similar, but is resettable.
These devices are installed between the “hot” and “neutral” and protective ground.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The other is “what does a “fuse” do?”
What might be the social consequences of an ethnic as opposed to a civic conception of the nation?
He then describes the function of a fuse.
eight
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Aubrey Anderson-Emmons cleverly comes out as bi with help from this 'Modern Family' scene - Yahoo
An AC voltage/ current source, and an ac inductive load.
So, the voltage could go up to 500 volts, and the fuse will not open up.
But it can get overloaded, and no longer works.
This Powerful Airplane Engine Has Been Around For Over 70 Years & Is Still Used Today - SlashGear
At least they know the answer if they wanted it.
But… the neutral is now “floating” because of the 1 ohm resistance.
In schematic diagrams this is the symbol for a fuse:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
For this case there are devices called Metal oxide varistors (MOV).
At one ohm, the resistor has a maximum of 1 watt power.
One
[old diagram got deleted by accident]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–10[John johnson John Johnson ]
It seems Mohan does not understand the difference between a comment and an Answer.
a photo is worth a thousand words.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
What is lightning?
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
First Sentence:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Upvotes:
A fuse is a non-resetable over current circuit protector.
but this device (an Inductor) … impedes the rapid changes in the current.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One is “what exactly is in a ‘surge protector’ ? ”
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The MOV will conduct when the voltage exceeds 50% of line voltage.
It also is a device that limits the change in current flow.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Edit 2024–10.
(Dc diagram shown, AC is similar).
2024–10–14 [Omar Gharbi Omar Gharbi ]
Because the load is inductive, the current lags the voltage.(by a bit).
Barnstars:
so, what happens?
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The third is lightning and “how it gets conducted into a home.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.